As Mike said, the DWL, CL and diagonals are standard reference lines for all the forms and should line up. The location of the shear line will be different on each form.

You may find it easiest to draw all the forms on one sheet of paper, but that is up to you.

> Nick When all form drawing are finished and cutout should all the DWL
> lines,shear lines and 70 degree angle lines, line up when placed on top of
> each other and if so is it possible to get all these lines by lining the
> DWL and center line up and take them off a full size drawing of form
> seven?. thank you in advance John