Yes, I use this method with a needle on the end in order to fill the infrequent bubble which develops when the glass does not lay flat. Pop the needle in and then fill up the bubble. Have also used it for getting into tight spaces (like the space between the sheer clamp and the deck where I did not bevel with perfect accuracy.

Dave

> ...a 60cc syringe, available at your local farm supply outlet. Leave the
> needle off. It's marked vary accurately in cc, and you can measure down to
> a 3cc batch. It works better with warmed resin. Also, it works great for
> putting the epoxy right where you want it, in just the right amount. I
> have cleaned it with acetone, but I hear white vinager works better?