Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Finished glassing the hull
By:jim
Date: 3/26/1999, 10:22 pm
In Response To: Finished glassing the hull (Mark Roberts)

Thanks for any opinions.

I just last week put another layer of tape on my 17'CLC. It has made it harder to sand out the edge line, and I may never get it out. But my previous home made and store bought kayaks always have tons of wear on the keel. I am not the most careful boater, and the B.C. coastline is rough, but I would still do it even if I lived in a different area.

Jim

Messages In This Thread

Finished glassing the hull
Mark Roberts -- 3/25/1999, 8:02 am
Why use tape?
Paul Jacobson -- 3/27/1999, 5:19 am
Re: Finished glassing the hull
jim -- 3/26/1999, 10:22 pm
Didn't do it--wish I had.
Shawn Baker -- 3/26/1999, 2:41 pm
Re: Finished glassing the hull
John Herr -- 3/26/1999, 2:09 pm
Do it (no text)
Stan Heeres -- 3/25/1999, 7:38 pm
Re: Finished glassing the hull
Kenneth Paul -- 3/25/1999, 10:35 am
Re: Finished glassing the hull
dave -- 3/25/1999, 8:47 am