Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Chesapeake coaming installation
By:David Dick
Date: 3/29/1999, 5:11 am
In Response To: Re: Chesapeake coaming installation (Grant Goltz - Squeedunk Kayaks)

I went even further and laid the spacers up over a sheet of wax paper on the boat. That way you can take it off when cured and grind away. I did the same for the top ply. One trick is to cut the cockpit hole undersize; use your completed coaming assembly to mark the deck for final cutting.

Messages In This Thread

Chesapeake coaming installation
Roger Donahe -- 3/28/1999, 10:37 pm
Don't Do It!!!
Shawn Baker -- 3/29/1999, 10:08 am
Re: Chesapeake coaming installation
Guy Wright -- 3/29/1999, 7:24 am
Re: Chesapeake coaming installation
David Dick -- 3/29/1999, 5:21 am
Re: Chesapeake coaming installation
Grant Goltz - Squeedunk Kayaks -- 3/28/1999, 11:18 pm
Re: Chesapeake coaming installation
David Dick -- 3/29/1999, 5:11 am
Re: Chesapeake coaming installation
Tony Lima -- 3/29/1999, 8:43 pm
Re: Chesapeake coaming installation
Mike Scarborough -- 3/28/1999, 10:59 pm
Re: Chesapeake coaming installation
Brian -- 3/28/1999, 11:16 pm