If during the stripping operation you run duct tape on the unglued edge of one sheer strip before stripping the other side, you don't have to fuss with wax paper and a putty knife. Epoxy won't stick to the shiny side, and tape won't get in your way like wax paper does. You can stick it down so the glass drapes over the sheer without gaps and bubbles, and if necessay you can tape additional masking to the shiny side of the tape.

> Method 3. Strip the entire boat with no glue between the shear strips.
> Sand it. Slip plastic between the deck and hull and glass the deck or hull
> outside while on the forms. Remove it. Then glasss the other half.