> The DWL in the table of offsets (figure 4-13) is correct. However, the DWL
> is a somewhat arbitrary point. Even if the DWL does not end up being the
> actual water line, all the other points are correct relative to the DWL.

I'm still a little confused. If I layout the station forms according to figure 4-13 and the endforms according to figure 4-15, the DWL on the station forms does not line up with the DLW on the endforms. Figure 4-16 shows the DWL on the endforms at the base of the strongback, but on the station forms the DWL is 2" below the strongback. I think I understand how it has to work but something still jive.