> I am planning to use System Three Epoxy to glass my Georgian Bay kayak. I
> am thinking of using the clear coat epoxy to put down a sealer coat and
> then use regular system three epoxy with #2 hardner for the rest. Is this
> a good idea, or should I use the same epoxy for the whole project? I have
> never worked with epoxy before, so any tips or advice would be greatly
> appreciated. What is the best weight cloth to use?

I have used System Three for the last 5 boats and I always do the wetout with the clear coat and then fill the weave with the regular. I have had no problems at all. I don't do a sealer coat (I've tried it and noticed no difference except that it added another sanding operation before I could wet-out).

I use 6oz cloth (that I also buy from System Three) I have hit a few rocks and it stood up pretty well with just scratches to fix. Hope this helps...

Edgar