Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Brightside vs. Interthane Plus
By:Brian
Date: 4/29/1999, 11:12 pm
In Response To: Re: Brightside vs. Interthane Plus (Tony Lima)

I have used brightsides and the two-part polyurethanes and I assure you that the best is the two part. Brightsides is soft. It will chip off with a fingernail and does not really offer a tough shield. I purchased a two-part that could be rolled on but I finally went with a sprayed on finish . It looks fine and the finish is so much harder than the Brightsides that the trouble and expense was worth it. Brian

Messages In This Thread

Brightside vs. Interthane Plus
John Stys -- 4/29/1999, 12:39 pm
Re: Brightside vs. Interthane Plus
Mark Roberts -- 4/30/1999, 7:52 am
Re: Brightside vs. Interthane Plus
Tony Lima -- 4/29/1999, 7:38 pm
Re: Brightside vs. Interthane Plus
Brian -- 4/29/1999, 11:12 pm
Re: Brightside vs. Interthane Plus
Greg -- 5/6/1999, 2:20 pm
Re: Brightside vs. Interthane Plus
Byron Lawrence -- 4/30/1999, 9:56 am
Epiphanes v. West System
Pete Roszyk -- 5/1/1999, 10:41 am
Re: Epiphanes v. West System
J . P. Scheib -- 5/4/1999, 2:03 am
Re: Brightside vs. Interthane Plus
Bram -- 4/30/1999, 11:44 pm
Re: Brightside vs. Interthane Plus
Ross Leidy -- 4/30/1999, 10:17 am