Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: (Another)Flush hatch question
By:Gary Toffelmire
Date: 4/30/1999, 6:32 pm
In Response To: Re: (Another)Flush hatch question (Nick Schade - Guillemot Kayaks)

> I have not bothered masking the crack. The resin does drip through a
> little. I just carve the excess off with a chisel while the resin is still
> somewhat soft. I just haven't come up with a good way to fill in the gap.
> I'm open to suggestions.

Plasticine??

Messages In This Thread

(Another)Flush hatch question
Ross Leidy -- 4/30/1999, 9:41 am
Re: (Another)Flush hatch question
Guy Wright -- 4/30/1999, 10:19 am
Re: (Another)Flush hatch question
Nick Schade - Guillemot Kayaks -- 4/30/1999, 9:45 am
Re: (Another)Flush hatch question
Gary Toffelmire -- 4/30/1999, 6:33 pm
Re: (Another)Flush hatch question
Gary Toffelmire -- 4/30/1999, 6:32 pm