> It looks to me that you did not remove the amine blush (waxy buidup) that
> is a by product of the epoxy reaction. The best way I have found is to use
> an amonia based household cleaner. We have a product here called Handy
> Andy. I give the surface a good scrub with the cleaner and a small amount
> of warm water then clean off with clean warm water and allow to dry. I
> have no idea what brushing liquid is. But if it is not a white spirit or
> mineral terpentine then it could be the problem.

> If it still has not dried then you will have to scrape off the mess sand
> with an open weave alumina sander (with care) then clean and sand with
> water paper, repair any glass and epoxy problems then start all over again

> Rob

Thanks,

Is there a good chemical way to remove partially cured varnish from a boat without damaging the the epoxy? I'm willing to sand but if there is a faster way that won't hurt the epoxy, I'd prefer to do it that way.

Mike