Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Could I lengthen it?
By:Paul Jacobson
Date: 5/4/1999, 2:34 am
In Response To: Could I lengthen it? (Brian T. Cunningham)

> Humm, I'll have to see what a used boat goes for, since this is just to
> get me in the water.

> Could you widen it out?

> Nice looking boat, but looks like it would take too long

Look at the kit from Uncle John's country store for his pirogue. www.unclejohns.com/boat

The boat can be made 12 to 15'8'' long and the kit of stem posts, plans and premade frames is $47.50 (US) You add some plywood to this for the sides and floor.

Construction looks simple and quick. Cut plywood sides and screw to the stem and stern posts. Drop in the frames to form the shape. Flip the assembly over so you can lay on flat sheets of plywood for the floor. Trim off the excess plywood, seal the seams, paint it and go.

It looks to be a bit more than 6 hours for a first time job, but I suppose a weekend should do it if you dont have to make multiple trips to the hardware store.

I'd add seats. Nothing fancy, just a few pieces of 1 x 10 resting on wooden cleats that were screwed and glued to the hull sides.

Hope this helps.

Paul Jacobson

Messages In This Thread

6 hour canoe costs
Brian T. Cunningham -- 5/3/1999, 1:40 pm
decided to concentrate on the current project
Brian T. Cunningham -- 5/10/1999, 2:00 pm
Re: 6 hour canoe costs
Jim -- 5/4/1999, 1:18 pm
Re: 6 hour canoe ?
Roger Donahe -- 5/4/1999, 5:56 pm
#125 page 46
Brian T. Cunningham -- 5/4/1999, 6:55 pm
Re: 6 hour canoe
Don Beale -- 5/3/1999, 5:46 pm
Oops -- I forgot about that
Brian T. Cunningham -- 5/3/1999, 6:31 pm
Re: Oops -- I forgot about that
Don Beale -- 5/4/1999, 12:28 am
Six-Hour Canoe from WoodenBoat mag (pic)
Brian T. Cunningham -- 5/4/1999, 11:31 am
Re: 6 hour canoe costs
Don Beale -- 5/3/1999, 1:57 pm
Could I lengthen it?
Brian T. Cunningham -- 5/3/1999, 3:11 pm
Re: Could I lengthen it?
Hans Friedel -- 5/4/1999, 5:23 pm
Cool thanks :)
Brian T. Cunningham -- 5/4/1999, 7:01 pm
Re: Could I lengthen it?
Paul Jacobson -- 5/4/1999, 2:34 am