> I am just about ready to install foot pegs. I went through all the
> messages and did not find any information at all, on how or or what
> material is used. I know that you can buy the hardware, but I don't want
> to drill through the hull. is there anyone out there who can help? The
> Kayak is the Caspian Sea

> David I cut two wooden strips 1 1/2" by 18" and countersunk T-nuts into them. I then epoxied them to the inside of my kayak and screwed the footpeg rails to the T-nuts. Quite strong and no holes thru the hull. Randy