> I am in hopes someone out there has some suggestions for my situation. I
> am building an Osprey Std. Last fall I finished the hull and glassed the
> outside of it. I glued the deck together but cold weather hit before I
> could go further. I picked back up this spring and finished the outside of
> the hull. I am ready to glass the inside of the hull. I now find that the
> deck has "relaxed" along the center seam, and it has become too
> large for the hull. How to obtain a fix? Osprey says I might have to cut
> the glue line and reglue and re do the glass reinforement tape. I wonder
> if I can, with the use of wire get the deck into the right shape and then
> glue it to the hull. Any thoughts or suggestions would be helpful. Thanx

I was able to take apart one of the seams on my Arctic Tern by carefully sanding off the epoxy and fiberglass tape.

Mike