Date: 7/16/1999, 2:58 pm
> Hi
> I am now putting the deck riggin on my ches. 17. When screwing in to the
> sheer clamps through the deck, to attach the webbing loops, do I have to
> fill the screw holes with epoxy or are they sealed by the screw?
> Thanks again,
> Paul
Paul,
I have seen big sailing ships and epoxy manufacturer websites that recommend this method. Drill an oversized hole (about one-half to one full diameter larger), fill it with epoxy, and let it cure. Then drill out the proper sized hole and install the screw. This is probably big time overkill for a kayak but I'm doing it anyway. As others on this website will tell you, my boat ain't light.
Happy Boatbuilding,
John, Chesapeake 18
Messages In This Thread
- Fitting Out
Paul Wild -- 7/15/1999, 8:29 pm- Re: Fitting Out
lee -- 7/23/1999, 4:48 pm- Re: Fitting Out
John Herr -- 7/16/1999, 2:58 pm- Re: Fitting Out
Shawn Baker -- 7/16/1999, 1:58 pm- Re: Fitting Out
Mike Hanks -- 7/18/1999, 3:14 am- Re: Fitting Out
Shawn Baker -- 7/19/1999, 11:59 am
- Re: Fitting Out
- Re: Fitting Out
- Re: Fitting Out