Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Fitting Out
By:Mike Hanks
Date: 7/18/1999, 3:14 am
In Response To: Re: Fitting Out (Shawn Baker)

> Hi Paul,

> When I rigged the deck of my Ches 17, I dropped a few drops of varnish
> into the hole. I figured it would seal the grain almost as well as epoxy
> would, but it still let me unscrew the screws to remove my rigging and
> refinish my boat this spring.

> Shawn

Epoxy doesn't stick to metal like it does to wood, so epoxy would work like the varnish only it should last a little longer. But varnish should be fine too.

Mike

Messages In This Thread

Fitting Out
Paul Wild -- 7/15/1999, 8:29 pm
Re: Fitting Out
lee -- 7/23/1999, 4:48 pm
Re: Fitting Out
John Herr -- 7/16/1999, 2:58 pm
Re: Fitting Out
Shawn Baker -- 7/16/1999, 1:58 pm
Re: Fitting Out
Mike Hanks -- 7/18/1999, 3:14 am
Re: Fitting Out
Shawn Baker -- 7/19/1999, 11:59 am