> Hi Mike,

> Right before I applied the varnish I sanding the Deck interior with 80
> grit ROS but I guess that was not an effective way to remove Amine Blush.
> Can you fill me in on what Epoxy Wash is made of? The System 3 Epoxy
> guidebook mentions soapy water and a scrubbing pad. I do not remember them
> refering to Epoxy Wash.

> Thanks, Randy

> Thanks, Randy

Sanding does not remove amine blush, it just smears it around. Plain soap and water should work, but I wanted to be on the safe side. I used Interlux 202 Fiberglass Solvent Wash. Ingedients are as follows: light petroleum naphtha, methyl isobutyl ketone, and cyclohexanone. It is toxic stuff, I used it outside while a good breeze was blowing. Everybody says it kills brain cells fast! It does do a good job of cleaning fiberglass.

Mike