I have heard of using thin tracing paper instead of rice paper - no experience with it.

I will be trying to accomplish the same thing in a week or two, so let us know what ends up working.

> I'm building a Pygmy Coho and wanted to put a small logo under the glass
> on the deck identifying the design and its origin. I printed up a sample,
> then xeroxed it onto rice paper. When I made a test panel on scrap wood
> using some slightly bubbly epoxy left at the end of glassing the inside of
> the hull, I found that the rice paper didn't "virtually disappear in
> the resin" as I'd hoped from Nick's book, but remained as a cloudy
> opacity which obscured the grain of the wood and clearly showed the shape
> of the paper. This rice paper was fairly thick, apparently handmade -- all
> the art store seemed to stock. I'm open to any thoughts about how to get
> the logo on the boat without compromising the structural integrity of the
> glass/epoxy layer.