> I also highly recommend the two books recommended by M. Scarborough.

> Successfully working with epoxy (NOT the polyester version) is one of the
> more critical parts of S&G or strip building. The newer epoxy resins are
> more expensive than the older formulations (think Bondo) but are virtually
> odor-free and incredibly versatile.

> On my CLC, I used "West Systems" epoxy (sold by West Marine),
> but some other brands that seem popular with other builders include
> "System Three,""MAS" and "RAKA." All of
> these brands have web sites with EXCELLENT free or low cost information
> about fillers, joints, temperature considerations, etc. Also check past
> message threads on this board for more points on the finer points of
> working with epoxy and fiberglass. These guys/girls have certainly been an
> incredible resource for me.

> Definitely do a lot of reading before you start. You'll save large amounts
> of time, money and frustration.

Byron, thanks for the info. What is the difference between your recomended resins and polyester? Is polyester not binding enough? -Fred