Hopefully this will link those interested parties to information on how to build more economical forms for the Walrus skin-on-frame kayak from George Putz's fine book "Wood and Canvas Kayak Building"
Putz describes a method of building his forms that makes these things 35 to 40 inches highso they can be set directly on the floor. Since many people on this board are familiar with the concept of using a strongback for building -- and may have one already -- I've translated his data to produce building forms that are 20 inches shorter. At the same time, I am providing them in a Cartesian co-ordinate form.
These shorter forms can be cut from material that is 24 inches wide, which I chose as a maximum purely for personal convenience. The lumber store ripped my plywood panels to 2 x 8 feet so I could cart them home more easily, and I wanted to be able to use this narrower wood for my building forms.
In Putz's book he describes how to make these forms by drawing arcs of various diameters. This requires a bit more skill than just plotting a point so many inches up, and so many to the left or right. Since this is new information, I'm not messing with his copyright, merely commenting on it. The calculations were rounded to the nearest 1/16th of an inch.
You will still need Putz's book for information on form spacing and the location of the sheer chine, which defines the height of the side of the boat.
There are two sheets with specifications for the two boats described in the book. The URL for the 17 foot Walrus is:
http://www.geocities.com/eureka/business/7882/walrus17.htm
The URL for the 18 1/2 foot walrus is:
http://www.geocities.com/eureka/business/7882/walrus18.htm
These should be easily readable on a full browser screen, and should print out neatly so you'll have a hard copy, should you want one.
Hope this helps those who are building a Walrus.
Paul G. Jacobson
Messages In This Thread
- graphing points for Putz Walrus forms
Paul G. Jacobson -- 10/15/1999, 3:40 am- Re: graphing points for Putz Walrus forms
Ben -- 10/16/1999, 8:03 pm- Re: graphing points for Putz Walrus forms
Tom Kurth -- 10/15/1999, 8:14 pm- Re: Skene vs. Putz
Mike Hanks -- 10/15/1999, 11:20 am- Re: Skene vs. Putz
Tom Kurth -- 10/16/1999, 8:48 pm- Re: Skene vs. Putz
Mike Hanks -- 10/17/1999, 12:50 am
- No problemo Dude
Paul G. Jacobson -- 10/15/1999, 4:41 pm - Re: Skene vs. Putz
- Re: graphing points for Putz Walrus forms
- Re: graphing points for Putz Walrus forms