Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Mixing Cups Worked For Me
By:Mike Hanks
Date: 11/18/1999, 1:37 pm
In Response To: Re: Mixing Cups Worked For Me (Paul Connolly)

> I didn't have pumps on my first project - and I sort of just ignored the
> probability that the pumps were inaccurate on my second project. I've
> never had any problem with curing - except once and it was a mixing
> problem with thick epoxy on a cold night when I should have gone to bed
> instead of....

> In any case - here is my question: When I was using mixing cups -
> especially for very small batches - I could never get 100% of the stuff
> out of the cups. I always had a sort of sinking feeling that I wasn't
> getting it right. Even though the pumps were not very accurate (I ran out
> of resin (I think) long before the hardener) at least there was no
> scraping or sinking feeling.

> How do y'all scrape the goop out of the mixing cups?

I use a calibrated plastic cup and leave a wood stirstick in the cup overnight, the next morning I pull the stick out and most of the epoxy comes out with it. the rest peels off easily.

Mike

Messages In This Thread

Epoxy pump dispensers, users beware!
Matthew Bastian -- 11/16/1999, 8:55 am
Coffee Creamers
Jay Babina -- 11/18/1999, 10:41 am
Re: Yogurt Containers
Shawn Baker -- 11/19/1999, 10:39 am
Mixing Cups Worked For Me
David Bryson -- 11/16/1999, 6:49 pm
Re: Mixing Cups Worked For Me
Paul Connolly -- 11/18/1999, 12:34 pm
Re: Mixing Cups Worked For Me
Nolan -- 11/19/1999, 6:26 am
Re: Cleaning the mix cups
Don Beale -- 11/18/1999, 5:13 pm
Re: Mixing Cups Worked For Me
Mike Hanks -- 11/18/1999, 1:37 pm
Re: Mixing Cups Worked For Me
Paul Connolly -- 11/19/1999, 1:21 pm
Re: Mixing Cups Worked For Me
Nolan -- 11/19/1999, 2:07 pm
Re: Mixing Cups Worked For Me
Paul Connolly -- 11/19/1999, 1:21 pm
Re: Ditto
Mike Hanks -- 11/20/1999, 11:01 am
Re: Mixing Cups Worked For Me
Ross Leidy -- 11/19/1999, 3:09 pm
Re: Mixing Cups Worked For Me
Shawn Baker -- 11/19/1999, 4:08 pm
Okay, you've provoked a rant
Ross Leidy -- 11/20/1999, 1:41 pm
Re: Okay, you've provoked a rant
lee -- 11/20/1999, 9:08 pm
Re: Okay, you've provoked a rant
Ian Johnston -- 11/20/1999, 3:28 pm
Re: Supporting the Rant
Shawn Baker -- 11/20/1999, 3:21 pm
Re: Epoxy pump dispensers, users beware!
Nolan -- 11/16/1999, 10:50 am
Re: Epoxy pump dispensers, users beware!
Nick Schade - Guillemot Kayaks -- 11/16/1999, 10:08 am
Re: Dispensers and Ketsup
Dan Lindberg -- 11/16/1999, 1:20 pm
Re: use cheap mixing cups
Ross Leidy -- 11/16/1999, 9:22 am
Re: use cheap mixing cups
addison m. -- 11/21/1999, 12:43 am
Re: use cheap mixing cups
Phillip Kearney -- 11/17/1999, 5:22 am
Re: use cheap mixing cups
Matthew Bastian -- 11/17/1999, 1:39 pm
Medical Dispensing Cups
Chris in Cajun Country -- 11/16/1999, 10:18 pm
Re: Medical Dispensing Cups
Rehd -- 11/16/1999, 10:53 pm
Re: use cheap mixing cups
Paul C. -- 11/16/1999, 12:19 pm
Re: use cheap mixing cups
Shawn Baker -- 11/16/1999, 11:00 am