Bill-- Where did you get birch plywood? ive looked (albeit not hard) and havnt found any. I thought to use two types of wood for looks

> Hi All,

> I put a page up with some pictures of my really rough CLC 17LT (still flat
> panels now). There is a picture of the epoxied birch plywood, which looks
> kind of sharp. There's not a lot of detail on the page, since there are so
> many great pages on the web, but there's pictures of where I am. And, yes,
> on the next boat, I'm going to put packing tape on either side of the
> joint when I glue it.

> I was going to get the panels lofted and cut this weekend, but a friend of
> mine is moving and offered to let me borrow his Ches. 16, PFD, and spray
> skirt while the movers were at his house, so I've been poking around the
> CT river instead of working in my basement. It is incentive to work next
> week once I have to give the boat back. I saw the eagles that are living
> at Gillette Castle SP harassing the ducks that live there. On my way out
> again.

> Bill