Why not just layup a fiberglass hatch over the "hatch" molded in the deck. After the resin cures, pop it off the deck, trim the edges, and cut a hole in the deck. Use some weatherstripping for a hatch seal and nylon straps with side-release buckles for tiedowns.

Shawn

> Perception used to manufacture hatch kits for its Aquaterra Spectrum and
> Spectrum S boats. These aftermarket kits may have been discontinued when
> Perception dropped the Spectrum line.

> I own two Spectrum (Std and "S") and would like to know if
> anyone has the kits in question (2HATCHSPEC for Spectrum, 2BKHDKIT for
> Spectrum, 2HATCHSPEC for Spectrum S, 2BKHDKIT for Spectrum S), or if there
> are other aftermarket sources that would have kits that are compatible.

> Thanks

> FVC