Sanding disk
In Response To: Re: scarf splicing strips (Walter H. Klaus)
> I bought a 12" Grizzly plate sander ($149.00 & 71 lbs.) for doing
> scarfing. I just squared up the face and mounted a board at a very steep
> angle and run the strips from right to left. The left side of the board is
> right up to the edge of the disc sander. My scarfs are about 12:1. Will
> test them this morning.
> Walter H. Klaus
I have a 10 inch sanding disk that goes on my table saw. If there is no blade on the saw, then the sanding disk is on. It is much less expensive (and lighter) than a dedicated machine.
I agree, this is a wonderful way to do scarfs on cedar strips. The wood is so soft it is easily sanded into shape.
PGJ
Messages In This Thread
- cove and bead
Butch -- 3/30/2000, 3:17 pm- Grain and single scarfing
mike allen ---} -- 3/31/2000, 4:11 pm- Re: cove and bead
Nick Schade - Guillemot Kayaks -- 3/31/2000, 8:49 am- Re: cove and bead
Edgar Kleindinst -- 3/31/2000, 7:34 am- Re: cove and bead
Kent LeBoutillier -- 3/31/2000, 6:20 am- Re: scarf splicing strips
Dave Houser -- 3/31/2000, 1:57 am- Re: scarf splicing strips
Walter H. Klaus -- 4/2/2000, 8:54 am- Sanding disk
Paul G. Jacobson -- 4/2/2000, 6:46 pm- Re: Sanding disk
Walter H. Klaus -- 4/3/2000, 9:44 pm- Re: Sanding disk
John B. -- 4/2/2000, 7:28 pm- Re: Sanding disk
Paul G. Jacobson -- 4/3/2000, 1:13 pm- Re: Sanding disk
John B. -- 4/3/2000, 7:22 pm
- Re: Table Saw Sanding disk Source
Dave Houser -- 4/2/2000, 9:35 pm- Re: Table Saw Sanding disk Source
John B. -- 4/3/2000, 7:48 am
- Re: Sanding disk
- Re: Sanding disk
- Re: Sanding disk
- Re: scarf jig
Don Beale -- 3/31/2000, 12:13 pm- Re: scarf jig
Spidey -- 3/31/2000, 3:14 pm- Re: scarf jig
Don Beale -- 4/1/2000, 1:27 am- Re: scarf jig
Spidey -- 4/1/2000, 2:07 am
- Re: scarf jig
- Re: scarf jig
- Re: scarfing jig
Hank -- 3/31/2000, 9:33 am - Sanding disk
- Re: cove and bead
Paul G. Jacobson -- 3/30/2000, 11:37 pm- Re: THAT explains it!
Spidey -- 3/31/2000, 12:48 am- Re: THAT explains it!
Hank -- 3/31/2000, 9:25 am- Actually, it is more like this
Paul G. Jacobson -- 3/31/2000, 4:42 am - Actually, it is more like this
- Re: THAT explains it!
- Re: cove and bead
Eric Schade (shearwater Boats) -- 3/30/2000, 7:36 pm- Re: cove and bead
Dean Trexel -- 3/30/2000, 5:13 pm- Re: cove and bead
Vaclav Stejskal -- 3/30/2000, 4:34 pm - Re: cove and bead
- Grain and single scarfing