Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Table Saw Sanding disk Source
By:Dave Houser
Date: 4/2/2000, 9:35 pm
In Response To: Re: Sanding disk (John B.)

It is a 10" diameter (for a 10" saw) by 3/16" thick steel disk that replaces the saw blade in your table saw. The sanding disks glue on with the standard disk adhesive both sides are can be used. I got mine at Sears years ago.

See: http://shop.woodcraft.com/woodcraft/product_family.asp?family%5Fid=1809&pf%5Fid=sanding

The problem with them is that the table saw blade speed is too fast for the correct sanding speed. They work fine if you use sharp sandpaper and don't use too much pressure especially with hard dense woods.

Messages In This Thread

cove and bead
Butch -- 3/30/2000, 3:17 pm
Grain and single scarfing
mike allen ---} -- 3/31/2000, 4:11 pm
Re: cove and bead
Nick Schade - Guillemot Kayaks -- 3/31/2000, 8:49 am
Re: cove and bead
Edgar Kleindinst -- 3/31/2000, 7:34 am
Re: cove and bead
Kent LeBoutillier -- 3/31/2000, 6:20 am
Re: scarf splicing strips
Dave Houser -- 3/31/2000, 1:57 am
Re: scarf splicing strips
Walter H. Klaus -- 4/2/2000, 8:54 am
Sanding disk
Paul G. Jacobson -- 4/2/2000, 6:46 pm
Re: Sanding disk
Walter H. Klaus -- 4/3/2000, 9:44 pm
Re: Sanding disk
John B. -- 4/2/2000, 7:28 pm
Re: Sanding disk
Paul G. Jacobson -- 4/3/2000, 1:13 pm
Re: Sanding disk
John B. -- 4/3/2000, 7:22 pm
Re: Table Saw Sanding disk Source
Dave Houser -- 4/2/2000, 9:35 pm
Re: Table Saw Sanding disk Source
John B. -- 4/3/2000, 7:48 am
Re: scarf jig
Don Beale -- 3/31/2000, 12:13 pm
Re: scarf jig
Spidey -- 3/31/2000, 3:14 pm
Re: scarf jig
Don Beale -- 4/1/2000, 1:27 am
Re: scarf jig
Spidey -- 4/1/2000, 2:07 am
Re: scarfing jig
Hank -- 3/31/2000, 9:33 am
Re: cove and bead
Paul G. Jacobson -- 3/30/2000, 11:37 pm
Re: THAT explains it!
Spidey -- 3/31/2000, 12:48 am
Re: THAT explains it!
Hank -- 3/31/2000, 9:25 am
Actually, it is more like this
Paul G. Jacobson -- 3/31/2000, 4:42 am
Re: cove and bead
Eric Schade (shearwater Boats) -- 3/30/2000, 7:36 pm
Re: cove and bead
Dean Trexel -- 3/30/2000, 5:13 pm
Re: cove and bead
Vaclav Stejskal -- 3/30/2000, 4:34 pm