Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Using 1x2 steel
By:Tony
Date: 4/4/2000, 1:10 pm
In Response To: Re: Using 1x2 steel (Don)

> mick, Good idea, I had not thought of that. I measured up and there is not
> enough 2x1 to run a parallel piece but I have had another dig into the
> steel stack and unearthed 4x2 galvanised steel box section. this has all
> the stiffness needed. This will do the trick. Will make a start as soon as
> a busy period at work settles down. Thanks once again Don

Wow! That is A STRONG BACK!!

Messages In This Thread

Steel Backbone
Don -- 4/1/2000, 5:05 pm
Re: Steel Backbone
Bill Heuser -- 4/3/2000, 12:26 am
Re: Steel Backbone
Don -- 4/3/2000, 4:43 am
Using 1x2 steel
mike allen ---} -- 4/3/2000, 11:54 am
Re: Using 1x2 steel
Don -- 4/4/2000, 3:35 am
Re: Using 1x2 steel
Tony -- 4/4/2000, 1:10 pm
Re: Steel Backbone
Hank -- 4/1/2000, 7:55 pm
Re: Steel Backbone
Travis -- 4/2/2000, 1:38 pm