> I really like Yakima saddles but the Hully Roller is too pricey. I made my
> own system by making a V saddle from plywood and covering it with foam and
> carpet. It looks like kinda like a wing. The V is the same angle as the
> boat bottom and is about 12x20". I mounted the saddle on the rear bar
> with the Yakima saddle on the front bar. Lift bow onto the V saddle and
> lift rear of boat, slide it forword till it reaches the front saddle. The
> large surface area supports the hull and the carpet protects the finish.
> If you make 2 V saddles you only need one set of Yakima or Thule saddles
> to carry 2 boats.

> Larry C.

If you're in the building mood, take a look at Ross Leidy's page. Check out the "Cradles" link at the left of the page. Ross has designed two types of carriers, one set for a Guillemot and the other for a Panache.

They are great designs and could be modified for any yak. The cradles don't look as good as the yaks, but they must be among the best looking cradles around.

Ross, I hope you don't mind the plug!

coop