> I have found that mixing 3 oz. is enough for a fill coat on either the
> hull or the deck. If I mix more than that I get the runs. I have fill both
> the deck and hull this way and have no runs (yet). The rag sounds good but
> it seems as though you have to be leaving alot of epoxy in the rag. (weigh
> it befor and after) With a thin foam roller you can cover with 3 oz. It
> makes you spread it thin. It does take 5 or 6 coats though.

I do the same as Jim, 3 oz. in a disposable paint tray and rolled on with a West's foam roller. I tip off with a good foam brush (grey foam, wood handle). It only takes 10-15 minutes start to finish per coat but as Jim said, it takes 5-6 coats to fill the weave. I think the extra time is worth it. There are no runs and no sanding or scrapeing necessary. The last coat is ready for sanding. I like this method because the multiple very thin coats make for a very evenly filled weave so when I start sanding I have less chance of cutting into te glass. Works for me!!

Larry C.