> Hi Ross, Check out the Kayak shop and go to the rudder or bowloop section.
> The drill is illustrated there. Normal drills cut unclean edges as you
> have found out. Brad point drills are used for making finished looking
> holes for dowels. I use stainless hardware so i drill minimum 16 x
> 3/16" holes in the deck. Vaclav

Hi All,

If you want the ultimate drill bit for wood and brittle surfaces use a forsner bit. They are pricey but I haven't seen anything work better. Will cut through wood and arborite and such, leaving such a perfect edge that you have to be careful not to cut yourself on it!!

Ian