FWIW, I'm currently building a CLC North Bay and there's nothing in the instructions about glassing the bulkheads or even using tape when installing them - just fillet them in place and then coat with epoxy to seal.

: I'm building a Pygmy Coho and getting started on the hatches and bulkheads.
: The instructions call for glassing both sides of the plywood bulkhead and
: then using glass tape to attach the bulkheads to the boat. I'm tempted to
: simply put a couple of coats of epoxy on the bulkheads and then glue them
: in place making a nice fillet on each side.

: I've found there is often a good reason that the instructions say to do a
: task a certain way but in the case it seems like overkill. I read the
: minicell versus plywood bulkhead discussion a while back realized that
: there are some on this board that will tell me that minicell is the way to
: go. But I've decided on plywood for certain.

: If I skip the glassing and taping am I headed for trouble?

: -DaveW