Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Wrapping The Coaming Lip
By:Don Bobzien
Date: 5/29/2000, 8:10 am
Date: 5/29/2000, 8:10 am
In Response To: Wrapping The Coaming Lip (Dwight Shelato)
Try using a heat gun / hair dryer. I finished mine using 2 mm x 8 mm black walnut strips and made it around ~ 5" radius. Don
: I can't seem to wrap the 1/8" x 3/4" strips around and keep the
: distance above the deck even (I'm tyring to make the lamination 1 strip at
: a time). Do I need to notch the strips to make them go where I want? Any
: suggestions?
: I'm using white oak.
Messages In This Thread
- Wrapping The Coaming Lip
Dwight Shelato -- 5/28/2000, 10:48 pm- Re: Wrapping The Coaming Lip
Spidey -- 5/29/2000, 1:28 pm- Re: Wrapping The Coaming Lip
Don Bobzien -- 5/29/2000, 8:10 am- Re: Wrapping The Coaming Lip
Ed Walshe - Dublin Ireland -- 5/29/2000, 6:18 am- Re: Wrapping The Coaming Lip
Dale Frolander -- 5/29/2000, 12:40 am - Re: Wrapping The Coaming Lip
- Re: Wrapping The Coaming Lip
