Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Cutting strips - or burning them from the plan
By:Spidey
Date: 6/7/2000, 8:58 pm
In Response To: Cutting strips - or burning them from the planks? (Greg Hughes)

Hi Greg;

I only set up a table saw once for ripping, as I use a dumb radial arm saw . . . Wanna trade?

As I recall, the blade was zeroed to the miter slot first, the fundamental reference. Then the fence was zeroed to the blade. You know it has to be binding between the blade and fence, there is not much more in play here. How much of the blade is exposed above the stock? I think about 1/4" is about right. I'm sure one of our table saw experts will be in here momentarily with the full story, hope this helps.

Best Regards, Spidey

Messages In This Thread

Cutting strips - or burning them from the planks?
Greg Hughes -- 6/7/2000, 8:33 pm
Thanks for all the suggestions
Greg Hughes -- 6/8/2000, 10:05 pm
Re: Thanks for all the suggestions
Rehd -- 6/10/2000, 1:11 am
Re: Cutting strips - or burning them from the plan
mike allen ---> -- 6/8/2000, 12:37 pm
Re: Cutting strips - or burning them from the plan
Don Bowen -- 6/8/2000, 1:08 pm
Re: Cutting strips - use small wedges when needed
Hank -- 6/8/2000, 8:22 am
Re: Cutting strips - use small wedges when needed
Brian Wegener -- 6/9/2000, 11:08 am
Re: Cutting strips - or burning them from the plan
michael -- 6/8/2000, 6:34 am
Re: Cutting strips - or burning them from the plan
Don Bowen -- 6/8/2000, 10:36 am
Re: Cutting strips - or burning them from the plan
Charles Cooper -- 6/8/2000, 11:19 am
Re: Cutting strips - I forgot......
michael -- 6/9/2000, 5:24 am
Re: Cutting strips - or burning them from the plan
Charles Cooper -- 6/7/2000, 11:32 pm
Hate to ask but gotta
Tom Kurth -- 6/7/2000, 9:48 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/7/2000, 9:07 pm
Re: Cutting strips - or burning them from the plan
bob -- 6/8/2000, 11:23 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/9/2000, 1:11 am
Re: Cutting strips - or burning them from the plan
bob -- 6/10/2000, 8:24 am
Re: Cutting strips - or burning them from the plan
Rehd -- 6/10/2000, 11:02 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/9/2000, 1:19 am
Re: Cutting strips - or burning them from the plan
Brian Wegener -- 6/9/2000, 11:25 am
Re: Cutting strips - or burning them from the plan
Don Bowen -- 6/9/2000, 12:45 pm
Re: Cutting strips - or burning them from the plan
Spidey -- 6/9/2000, 10:05 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/10/2000, 12:53 am
Re: Cutting strips - or burning them from the plan
Don -- 6/7/2000, 9:18 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/7/2000, 9:26 pm
Re: Cutting strips - or burning them from the plan
JG -- 6/8/2000, 3:47 am
Re: Cutting strips - or burning them from the plan
Rehd -- 6/8/2000, 9:37 am
Re: Cutting strips - or burning them from the plan
JG -- 6/8/2000, 3:06 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/8/2000, 7:20 pm
Re: Cutting strips - or burning them from the plan
JG -- 6/9/2000, 2:12 pm
Re: Cutting strips - or burning them from the plan
Spidey -- 6/7/2000, 8:58 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/7/2000, 9:15 pm
Re: Cutting strips - or burning them from the plan
Dean Trexel -- 6/7/2000, 8:57 pm