Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Cutting strips - or burning them from the plan
By:Don
Date: 6/7/2000, 9:18 pm
In Response To: Re: Cutting strips - or burning them from the plan (Rehd)

Forget about the planer blade. Put in a carbide tip blade. Also, the measurement between fence and front of blade should be less then fence and back of blade.Forget about 100ths. that is what sandpaper is for! Cut the wood, and send it through the planer to get it kinda close. Good luck, Don

Messages In This Thread

Cutting strips - or burning them from the planks?
Greg Hughes -- 6/7/2000, 8:33 pm
Thanks for all the suggestions
Greg Hughes -- 6/8/2000, 10:05 pm
Re: Thanks for all the suggestions
Rehd -- 6/10/2000, 1:11 am
Re: Cutting strips - or burning them from the plan
mike allen ---> -- 6/8/2000, 12:37 pm
Re: Cutting strips - or burning them from the plan
Don Bowen -- 6/8/2000, 1:08 pm
Re: Cutting strips - use small wedges when needed
Hank -- 6/8/2000, 8:22 am
Re: Cutting strips - use small wedges when needed
Brian Wegener -- 6/9/2000, 11:08 am
Re: Cutting strips - or burning them from the plan
michael -- 6/8/2000, 6:34 am
Re: Cutting strips - or burning them from the plan
Don Bowen -- 6/8/2000, 10:36 am
Re: Cutting strips - or burning them from the plan
Charles Cooper -- 6/8/2000, 11:19 am
Re: Cutting strips - I forgot......
michael -- 6/9/2000, 5:24 am
Re: Cutting strips - or burning them from the plan
Charles Cooper -- 6/7/2000, 11:32 pm
Hate to ask but gotta
Tom Kurth -- 6/7/2000, 9:48 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/7/2000, 9:07 pm
Re: Cutting strips - or burning them from the plan
bob -- 6/8/2000, 11:23 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/9/2000, 1:11 am
Re: Cutting strips - or burning them from the plan
bob -- 6/10/2000, 8:24 am
Re: Cutting strips - or burning them from the plan
Rehd -- 6/10/2000, 11:02 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/9/2000, 1:19 am
Re: Cutting strips - or burning them from the plan
Brian Wegener -- 6/9/2000, 11:25 am
Re: Cutting strips - or burning them from the plan
Don Bowen -- 6/9/2000, 12:45 pm
Re: Cutting strips - or burning them from the plan
Spidey -- 6/9/2000, 10:05 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/10/2000, 12:53 am
Re: Cutting strips - or burning them from the plan
Don -- 6/7/2000, 9:18 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/7/2000, 9:26 pm
Re: Cutting strips - or burning them from the plan
JG -- 6/8/2000, 3:47 am
Re: Cutting strips - or burning them from the plan
Rehd -- 6/8/2000, 9:37 am
Re: Cutting strips - or burning them from the plan
JG -- 6/8/2000, 3:06 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/8/2000, 7:20 pm
Re: Cutting strips - or burning them from the plan
JG -- 6/9/2000, 2:12 pm
Re: Cutting strips - or burning them from the plan
Spidey -- 6/7/2000, 8:58 pm
Re: Cutting strips - or burning them from the plan
Rehd -- 6/7/2000, 9:15 pm
Re: Cutting strips - or burning them from the plan
Dean Trexel -- 6/7/2000, 8:57 pm