Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Achieving a fair surface finish
By:Spidey
Date: 6/8/2000, 12:55 pm
In Response To: Re: Achieving a fair surface finish (Nick Schade - Guillemot Kayaks)

Hi Nick;

And I tend to be rather A.R. about the finish . . . and perhaps some other things as well . . . As Pete points out in his reply, and as you have said many times, these things are designed to be used - But I do want at least one good photo to be able to look back at. 8-)

Best Regards, Spidey

Messages In This Thread

Achieving a fair surface finish
Spidey -- 6/8/2000, 12:44 am
Discovery: Thin Epoxy and Fill Coats
Spidey -- 6/8/2000, 10:22 pm
Re: Discovery: Thin Epoxy and Fill Coats
michael -- 6/9/2000, 5:20 am
Re: Achieving a fair surface finish
Dwight -- 6/8/2000, 6:51 pm
Re: Achieving a fair surface finish
Spidey -- 6/8/2000, 7:43 pm
Re: Achieving a fair surface finish
Dave Houser -- 6/9/2000, 4:41 am
Re: Achieving a fair surface finish
Spidey -- 6/9/2000, 8:55 am
Re: Achieving a fair surface finish
peter czerpak -- 6/8/2000, 10:45 am
Re: Fear of the oyster bed
Spidey -- 6/8/2000, 12:44 pm
Re: Fear of the oyster bed
peter czerpak -- 6/8/2000, 3:03 pm
Re: Achieving a fair surface finish
Nick Schade - Guillemot Kayaks -- 6/8/2000, 9:57 am
Re: Achieving a fair surface finish
Spidey -- 6/8/2000, 12:55 pm