: Hi Pete, I don't see the need to squeegee subsequent coats as the glass has
: semi-cured epoxy in it. Squeegeeing is for getting out EXCESS resin and
: making the resin content in the wood and glass even. As far as tipping
: with foam brushes isn't that to take care of bubbles?-lee

I ended up not sqeegieing the fill coat on the hull. Rolling the epoxy on put on a thin enough layer (we'll see tonight if there are drips). And I only tip out to remove bubbles and lines from the roller as well as perhaps slightly even out any excess epoxy. The yak is starting to look great.

Thanks, Pete czerpak albany, ny