I use E.A.S.T. Systems epoxy and find it extremely good. Their claims are: ~Completely Clear Finish ~No Amine Blush ~Low VOC's & Odor ~Exceptional Strength ~Increased Flexibility ~Low viscosity

Lorne.

: I'm getting together my shopping list for my 1st 17' stripper canoe (I know
: this is a kayak board!!!) and I'm curious as to what's the standard in
: epoxy for a strip project. I've read a lot of literature & I'm curious
: as to what the seasoned builders prefer. System 3? West System? Raka?

: Here's pretty much what I've learned from reading various sources: West
: Systems is good & expensive. They provide great customer service.
: Their mix ratios and handling need to be more exact than other
: manufacturer's formulas.

: System 3 is another good product. Lots of people recommend their Crystal Coat
: for wetting the initial layers and then using the regular epoxy for fill.

: Raka seems to be used by several builders and is thinner than most other
: companies formulations. Is it similar to System 3's Crystal Coat?

: Any recommendations would be greatly appreciated.

: Thanks Bob H