Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Composite Coaming
By:Spidey
Date: 6/15/2000, 10:40 am
In Response To: Re: Composite Coaming (David)

Hi David;

The strips were about 14-20" long, perhaps 3" wide, and laid along the coaming. Some of them were cut on the bias to make it easier to get around the curves. Dan was wetting them for me, while I laid and smoothed the wetted cloth around the coaming. With two of us working, we were able to complete the layup in about 1/2 hour, using one mix of 6oz of epoxy.

Best Regards, Spidey

Messages In This Thread

Composite Coaming *Pic*
Spidey -- 6/14/2000, 8:52 pm
Nice methology
Jay Babina -- 6/15/2000, 9:28 am
Re: Nice methodology
Spidey -- 6/15/2000, 11:01 am
Nice Work
mike allen ---> -- 6/15/2000, 12:34 pm
Re: Nice Work
Spidey -- 6/15/2000, 1:12 pm
Re: Cutting GLASS...
Hank -- 6/15/2000, 12:01 pm
Re: Cutting GLASS...
Spidey -- 6/15/2000, 1:05 pm
Re: Cutting GLASS...
Hank -- 6/15/2000, 2:43 pm
Re: Cutting GLASS...
Spidey -- 6/15/2000, 5:28 pm
Re: Composite Coaming
peter czerpak -- 6/15/2000, 8:21 am
Re: Composite Coaming
David -- 6/15/2000, 6:48 am
Re: Composite Coaming
Spidey -- 6/15/2000, 10:40 am
Re: Composite Coaming
Tig and Tink -- 6/15/2000, 12:18 am