I have all my strips cut and I am having trouble finding 1/4 inch drive router bits for cove and bead. the reason I am using 1/4 inch is because that's what I have access to, that out of the way....I have looked on the internet and locally for these bits, local search has been fruitless, most suppliers of bits can't even get them from their supplier, have found a couple on the net, one set from NC seemed "top of the line" and priced out at about $100, I also found a set from a company in Philadelphia called MLCS, priced at about $45, one of the local suppliers said that the bits from this company were imported from an asian country with a poor human rights record and were less than desirable, I need to know if any of you have used these products, heard of these products, or can recommend another source, ( looked on the web at the supplier mentioned in Nick's book and the bits were not listed) thanks for your help, RMD