Bruce,

I used a very sharp chisel to cut the excess glue off of the two Pygmy's I built. The lines show up somewhat, but don't worry about it. Once the deck and bulkheads are installed, they are not visible.

: Faithfully following the directions for my Coho, I used hot glue to
: temporarily mount the forms on the inside of the hull. Now its time for
: them to come out. I have removed the forms using a soldering iron to
: soften the glue, but I am at a loss for how to get the remaining glue
: residue off of the hull interior. The stuff won't sand, won't peel off,
: and doesn't seem to want to scrape off. Any ideas? Please? I am also
: wondering why I didn't just wire the forms in instead of gluing them.
: Maybe next time. . .