: Faithfully following the directions for my Coho, I used hot glue to
: temporarily mount the forms on the inside of the hull. Now its time for
: them to come out. I have removed the forms using a soldering iron to
: soften the glue, but I am at a loss for how to get the remaining glue
: residue off of the hull interior. The stuff won't sand, won't peel off,
: and doesn't seem to want to scrape off. Any ideas? Please? I am also
: wondering why I didn't just wire the forms in instead of gluing them.
: Maybe next time. . .

Hot glue breaks lose with cold, I know on small things I just through them in the freezer for a little while and the stubborn hot glue pops right off. On a boat thou I might try an ice pack or just wait until winter (just kidding). Good luck

Jason