: Hi Dean;

: You may want to still give it some time. When I was doing experiments with
: pigments for my coaming, I kept adding more and more with each test -
: Successive batches took longer & longer to cure, but most still did
: eventually cure - up to a point. When I had sufficiently mis-mixed my
: epoxy with too much "other stuff," it stayed runny forever. If
: yours has gelled, and it was mixed *thoroughly*, my experience says it
: should harden. I never produced a batch that gelled but didn't ultimately
: harden, if that is any consolation to you.

Hi Spidey,

I just had a similar experience with mixing West Systems pigment with Raka epoxy. My test batch [off kayak] worked fine. I must have gotten a little generous with the pigment and it took a lot longer to cure on the hull. It is OK now but it had me worried for a bit.

Hank