Date: 7/11/2000, 1:50 pm
: A question - is a vent recommended even with hatches? I assume the hatches
: would let excess pressure vent out, unless held down extremely well. But
: in the case of a vacuum, the seal on the hatch may become even tighter
: than usual.
Probably depends. A kayak with VCP or the equivalent "Tupperware" seal hatches would probably hold a good seal, whether positive or negative pressure. (I blew a forward hatch off a FRG Pintail in surf once, but the pressure had more to do with the impact with the water coming off a haystack than with temps. A wooden hatch with some sort of foam or soft seal would vent positive pressure, but your point that a partial vacuum would draw it tighter is well taken.
I think the point of what I was trying to say at the start was that, in the warmer weather that draws kayakers out, we're far more likely to put a warm kayak in relatively colder water, thus generating the negative pressure that implodes decks --- or whatever the weakest point surrounding the compartment turns out to be. We certainly have the problem of blowing a hatch off a kayak after returning it to the rack --- and you can blow out a windshield in the process, apparently --- but you do not have the added potential for drowning at that point.
Jack Martin
Messages In This Thread
- Venting bulkheads
Jack Martin -- 7/7/2000, 6:26 pm- Re: Venting bulkheads
Ken -- 7/11/2000, 12:12 pm- Re: Venting bulkheads
Jack Martin -- 7/11/2000, 1:50 pm
- Re: Venting bulkheads
peter czerpak -- 7/10/2000, 12:15 pm- It needs to be two-way
Brian Nystrom -- 7/10/2000, 3:33 pm- Re: Venting bulkheads
Jack Martin -- 7/10/2000, 2:15 pm - Re: Venting bulkheads
- Vent for Bulkheads
Andreas Albat -- 7/10/2000, 12:02 pm- Another vent
mike allen ---> -- 7/10/2000, 6:27 pm- Re: Vent for Bulkheads
Brian Nystrom -- 7/10/2000, 3:29 pm- Re: Vent for Bulkheads
Robb -- 7/10/2000, 12:09 pm - Re: Vent for Bulkheads
- Re: Venting bulkheads
Vernon Lowery -- 7/8/2000, 8:39 pm- Re: Venting bulkheads
Mike Scarborough -- 7/8/2000, 12:52 pm- Re: I vote for vent on top
Dean Trexel -- 7/9/2000, 3:15 pm
- Re: Venting bulkheads
lee -- 7/7/2000, 11:24 pm- Re: Venting bulkheads
Jack Martin -- 7/8/2000, 1:12 am
- Re: Venting bulkheads
- Re: Venting bulkheads