Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Careful with the Two-Part expanding Foam
By:Rehd
Date: 7/21/2000, 9:56 pm
In Response To: Careful with the Two-Part expanding Foam (Robb)

: The catalyst for curing some of these foams is mositure (or humidity). You
: will need to check with the manufacturer to see if it will cure adequately
: in a closed/sealed-with-epoxy chamber.

Hi Robb

Due to expense, we may forgo the two part foam. I'm thinking of the sheet foam or peanuts. If I had used the foam, we we're going to pour it in a little at a time and let it expand, and then apply more as needed to fill, then place the seat top on. Thanks

Rehd

Messages In This Thread

Two-Part expanding Foam
Rehd -- 7/20/2000, 2:33 am
Careful with the Two-Part expanding Foam
Robb -- 7/21/2000, 2:05 pm
Re: Careful with the Two-Part expanding Foam
Rehd -- 7/21/2000, 9:56 pm
Re: Two-Part expanding Foam
Erez -- 7/20/2000, 11:00 pm
Re: Two-Part expanding Foam
Rehd -- 7/21/2000, 1:08 am
Re: Two-Part expanding Foam
Erez -- 7/21/2000, 11:54 pm
Re: Erez - FWIW
John B. -- 7/20/2000, 11:41 pm
Re: Erez - FWIW
Erez -- 7/21/2000, 11:39 pm
Re: Two-Part expanding Foam
Marty -- 7/20/2000, 4:52 pm
Re: Two-Part Foam from Jamestowndistributors.com
John B. -- 7/20/2000, 6:26 pm
Re: Two-Part Foam from Jamestowndistributors.com
Rehd -- 7/20/2000, 7:50 pm
save some money
Paul G. Jacobson -- 7/20/2000, 11:49 pm
Re: save some money
Rehd -- 7/21/2000, 1:34 am
The problem with sealed flotation compartments is:
Paul G. Jacobson -- 7/22/2000, 5:21 am
Re: save some money
Ralph Wight -- 7/21/2000, 11:57 am
Re: save some money
lee -- 7/21/2000, 2:58 am
Re: save some money
Rehd -- 7/21/2000, 8:41 am
I believe that the point of using foam...
Brian Nystrom -- 7/21/2000, 10:46 am
Re: save some money
John B. -- 7/20/2000, 11:58 pm
Re: Two-Part expanding Foam
Paul G. Jacobson -- 7/20/2000, 5:56 am
Re: Two-Part expanding Foam
Rehd -- 7/20/2000, 9:06 am
Re: Two-Part expanding Foam
RM Dalton -- 7/20/2000, 2:56 pm