Date: 7/21/2000, 11:02 pm
hello all,
It seems like I'm finally going to run out of the sys'3 I got with the coho kit. I'm considering getting a west sys .
some people posted here in the past, saying they used epoxy from 2 different manufacturers on the same kayak, without any problem of one type of epoxy not adhering to the other type, so I don't expect a problem here.
I need just a little amount, to lay some tape on the 2nd cut of my take-a-part, so it doesn't justifies a mail order.
my question is: how does epoxy characters changes between epoxies with different mixing ratios ?
is some type stronger/faster/harder/...... than the other ?
the sys'3 is 2 to 1 the west sys is 4 to 1 all the home type epoxies are 1 to 1
so what's the difference ?
any help appreciated.
Erez
Messages In This Thread
- epoxy mixing ratios between manufacturers ?
Erez -- 7/21/2000, 11:02 pm- Re: thx for the info NT
Erez -- 7/22/2000, 7:55 pm- Re: epoxy mixing ratios between manufacturers ?
Marek Uliasz -- 7/22/2000, 8:10 am- Re: epoxy mixing ratios between manufacturers ?
Shawn Baker -- 7/22/2000, 12:50 am - Re: epoxy mixing ratios between manufacturers ?
- Re: thx for the info NT