Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Spray Adhesive for sticking plans to forms?
By:Stan Woronko
Date: 8/10/2000, 5:13 pm
In Response To: Re: Spray Adhesive for sticking plans to forms? (Kent LeBoutillier)

: Charlie,

: I tried the Elmers as well and found it lousy. I got a can of 3M stuff at
: Home Depot that worked much better.

I had the same experience. 3M worked very well for me.

If you are tempted to try any water based glue, be aware that paper can stretch significantly when wet, and the stretch along the grain is not the same as across the grain of the paper. Take two identical sheets of paper, soak one in water and then compare. The difference can be surprising. With an 8.5x11 sheet of Xerox computer paper, the stretch was zero along the length, but 1/4" along the width. A simple way of stretching your kayak in one dimension if that's what you want.

Messages In This Thread

Spray Adhesive for sticking plans to forms?
Charlie Lesh -- 8/10/2000, 11:12 am
Re: Spray Adhesive for sticking plans to forms?
Roger Nuffer -- 8/10/2000, 11:58 pm
Re: Spray Adhesive for sticking plans to forms?
bob -- 8/10/2000, 9:59 pm
Forget the spray, try rubber cement
Paul G. Jacobson -- 8/10/2000, 7:51 pm
Re: Spray Adhesive for sticking plans to forms?
Chris Casazza -- 8/10/2000, 4:50 pm
Re: Spray Adhesive for sticking plans to forms?
Don -- 8/10/2000, 4:14 pm
use 3M spray mount adhesive
Don -- 8/10/2000, 1:02 pm
Re: Spray Adhesive for sticking plans to forms?
Don Beale -- 8/10/2000, 12:43 pm
Re: Spray Adhesive for sticking plans to forms?
Kent LeBoutillier -- 8/10/2000, 11:55 am
Re: Spray Adhesive for sticking plans to forms?
Stan Woronko -- 8/10/2000, 5:13 pm
Re: Spray Adhesive for sticking plans to forms?
Mike Hanks -- 8/10/2000, 11:51 am