Re: Gluing the strips
By:Paul Jacobson
Date: 5/4/1998, 12:58 pm
Date: 5/4/1998, 12:58 pm
In Response To: Re: Gluing the strips (Don Beale)
> Perhaps an ignorant suggestion - what about the "fast-cure"
> epoxies which come in a set of two syringes and require little mixing?
> Has anyone experimented with this?
> Composite Structures Technology (www.cstsales.com/glue.htm) offers a 5-minute epoxy from West Systems, ( G/5 ) sold by the half pint and the quart. 8 ounces are $10.65 32 ounces are $33.20
This is a lot cheaper than buying the little tubes, so maybe this can solve the cost problem.
Also I think they should have data on whether this will soften from the heat of encapsulating it in fiberglass/epoxy.
Paul Jacobson
Messages In This Thread
- Re: Gluing the strips
Nick Schade -- 4/30/1998, 7:42 pm- Re: Gluing the strips
Don Beale -- 5/1/1998, 11:55 am- Re: Gluing the strips
Paul Jacobson -- 5/4/1998, 12:58 pm- Re: Gluing the strips
Mark Kanzler -- 5/5/1998, 11:40 am- Re: Gluing the strips
Mark Kanzler -- 5/5/1998, 1:09 pm- Re: Gluing the strips
Mark Kanzler -- 5/6/1998, 12:59 am - Re: Gluing the strips
- Re: How about this...
Don Kerr -- 5/5/1998, 1:35 am- Re: How about this...
Nick Schade -- 5/5/1998, 5:13 pm- Re: How about this...
Mark Kanzler -- 5/5/1998, 6:06 pm
- Re: How about this...
- Re: Gluing the strips
- Re: Gluing the strips
Nick Schade -- 5/2/1998, 10:53 pm- fast epoxy for gluing strips
Paul Jacobson -- 5/2/1998, 12:11 pm- Re: I shoulda gotta patent.
Mark Kanzler -- 5/4/1998, 3:49 pm
- Re: Gluing the strips
Mark Kanzler -- 5/2/1998, 12:15 am - Re: Gluing the strips
- Re: Gluing the strips
NPenney -- 5/1/1998, 6:40 am - Re: Gluing the strips
- Re: Gluing the strips