Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Applying epoxy with rollers
By:Gary
Date: 8/28/2000, 8:51 pm
In Response To: Re: Applying epoxy with rollers (Larry C.)

A tip I learned from building glas sailplane wings... You apply the epoxy with a roller wait about 5 minutes than roll out a roll of toilet paper onto the wood... a little pressure while you unroll, wait about 5 minutes for the paper to absorb the extra glue and them slowly peel the paper off and toss it in a plastic trash bin... if you leave any pieces on the ground it stays. No runs, no lumps and no sanding. You do this about 4-5 times and you get a beautiful finish. You waste a lot more glue but you don't have to spend days sanding. Be sure to not apply the next coats before the first has completely dried or you'll have to lightly sand to get good adhession. Paper towels never worked well because of the dimple effect you get.

Messages In This Thread

Applying epoxy with rollers
Jimmy -- 8/28/2000, 2:15 pm
Re: Applying epoxy with rollers
Don Beale -- 8/28/2000, 4:46 pm
Runnnnss------
Jerry Siegel -- 8/28/2000, 10:20 pm
Re: Runnnnss------
Don Beale -- 8/29/2000, 10:11 am
Re: Applying epoxy with rollers
Larry C. -- 8/28/2000, 5:35 pm
Re: Applying epoxy with rollers
Gary -- 8/28/2000, 8:51 pm
Re: Applying epoxy with rollers
Jeff Fine -- 8/28/2000, 3:23 pm
Exactly...Squeegee = good, brushes = bad
Dale Frolander -- 8/28/2000, 5:01 pm
A better squeegee----
Jerry Siegel -- 8/28/2000, 10:11 pm
Re: A better squeegee----
Mike -- 9/1/2000, 2:13 am
Re: A better squeegee----
Rick -- 8/29/2000, 9:39 am
Your welcome--
Jerry Siegel -- 8/29/2000, 4:09 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:59 pm
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/29/2000, 3:47 pm
Re: Bucking the trend, using a brush
Don -- 8/30/2000, 2:18 am
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/30/2000, 9:21 am
foam brushes
Jimmy -- 8/30/2000, 4:30 am
Re: foam brushes
peter czerpak -- 8/30/2000, 7:51 am
Re: Applying epoxy with rollers
Ross Leidy -- 8/28/2000, 4:18 pm
Re: Applying epoxy with rollers
peter czerpak -- 8/28/2000, 2:28 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:54 pm