What kind of brush are you using?

I have been using a roller to apply the epoxy and tipping off with a foam brush on my fill coats. I use the roller because the foam brush doesn’t seam sturdy enough for applying the epoxy.

Don

: I have moved away from applying fill coats with a squeegee or roller. I now brush it on and am not having much problem with runs or drips.

: I apply the resin in the same way I apply varnish. Brush it on horizontally,
: even it out with vertical strokes and tip off with horizontal strokes.
: This seems to work quite well for producing an even coat with a minimum of
: runs, drips or errors.

: I might try a the cut-up roller for the last tipping off in the future. It
: has sounds like it has possibilities. But a brush applies the most resin
: so the number of coats required is fewer.

: BTW if I do get get drips, a Shinto Wood Rasp makes quick work of them.