Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: foam brushes
By:peter czerpak
Date: 8/30/2000, 7:51 am
In Response To: foam brushes (Jimmy)

: Those foam brushes are definitely not sturdy enough for applying epoxy. I
: have made the mistake of using them a couple of times and what usually
: happens is the foam starts to stretch and if you use it long enough tiny
: little pieces start coming off and make little little bumps all over your
: kayak. It is actually possible to use a half decent brush several times if
: you wash it in acetone and store it in a little bit of acetone.

Use them only once and toss them out afterwards. don't try and save them. throw them out when they start to fall apart. Most folks use the $0.25 to $1 per brush kind. Even cheap er when purchased mailorder.

Or get a good brush and wash with solvent everytime.

Pete czerpak albany, NY

Messages In This Thread

Applying epoxy with rollers
Jimmy -- 8/28/2000, 2:15 pm
Re: Applying epoxy with rollers
Don Beale -- 8/28/2000, 4:46 pm
Runnnnss------
Jerry Siegel -- 8/28/2000, 10:20 pm
Re: Runnnnss------
Don Beale -- 8/29/2000, 10:11 am
Re: Applying epoxy with rollers
Larry C. -- 8/28/2000, 5:35 pm
Re: Applying epoxy with rollers
Gary -- 8/28/2000, 8:51 pm
Re: Applying epoxy with rollers
Jeff Fine -- 8/28/2000, 3:23 pm
Exactly...Squeegee = good, brushes = bad
Dale Frolander -- 8/28/2000, 5:01 pm
A better squeegee----
Jerry Siegel -- 8/28/2000, 10:11 pm
Re: A better squeegee----
Mike -- 9/1/2000, 2:13 am
Re: A better squeegee----
Rick -- 8/29/2000, 9:39 am
Your welcome--
Jerry Siegel -- 8/29/2000, 4:09 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:59 pm
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/29/2000, 3:47 pm
Re: Bucking the trend, using a brush
Don -- 8/30/2000, 2:18 am
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/30/2000, 9:21 am
foam brushes
Jimmy -- 8/30/2000, 4:30 am
Re: foam brushes
peter czerpak -- 8/30/2000, 7:51 am
Re: Applying epoxy with rollers
Ross Leidy -- 8/28/2000, 4:18 pm
Re: Applying epoxy with rollers
peter czerpak -- 8/28/2000, 2:28 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:54 pm