Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Bucking the trend, using a brush
By:Nick Schade - Guillemot Kayaks
Date: 8/30/2000, 9:21 am
In Response To: Re: Bucking the trend, using a brush (Don)

I use cheap china-bristle "Chip" brushes to work epoxy. I buy them by the case and throw them out after one use, but some people have successfully cleaned them with vinegar.

: What kind of brush are you using?

: I have been using a roller to apply the epoxy and tipping off with a foam
: brush on my fill coats. I use the roller because the foam brush doesn’t
: seam sturdy enough for applying the epoxy.

Messages In This Thread

Applying epoxy with rollers
Jimmy -- 8/28/2000, 2:15 pm
Re: Applying epoxy with rollers
Don Beale -- 8/28/2000, 4:46 pm
Runnnnss------
Jerry Siegel -- 8/28/2000, 10:20 pm
Re: Runnnnss------
Don Beale -- 8/29/2000, 10:11 am
Re: Applying epoxy with rollers
Larry C. -- 8/28/2000, 5:35 pm
Re: Applying epoxy with rollers
Gary -- 8/28/2000, 8:51 pm
Re: Applying epoxy with rollers
Jeff Fine -- 8/28/2000, 3:23 pm
Exactly...Squeegee = good, brushes = bad
Dale Frolander -- 8/28/2000, 5:01 pm
A better squeegee----
Jerry Siegel -- 8/28/2000, 10:11 pm
Re: A better squeegee----
Mike -- 9/1/2000, 2:13 am
Re: A better squeegee----
Rick -- 8/29/2000, 9:39 am
Your welcome--
Jerry Siegel -- 8/29/2000, 4:09 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:59 pm
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/29/2000, 3:47 pm
Re: Bucking the trend, using a brush
Don -- 8/30/2000, 2:18 am
Re: Bucking the trend, using a brush
Nick Schade - Guillemot Kayaks -- 8/30/2000, 9:21 am
foam brushes
Jimmy -- 8/30/2000, 4:30 am
Re: foam brushes
peter czerpak -- 8/30/2000, 7:51 am
Re: Applying epoxy with rollers
Ross Leidy -- 8/28/2000, 4:18 pm
Re: Applying epoxy with rollers
peter czerpak -- 8/28/2000, 2:28 pm
Re: Applying epoxy with rollers
Jimmy -- 8/28/2000, 3:54 pm