Roger,
On page 24 of the book, it shows the front of the cockpit on the Walrus 17, 6'7" behind the bow. His cockpit is 3'6" long. That puts the back of the cockpit 121" behind the bow, on a 200" kayak. My kayaks were 202". On my first kayak I put the back of the cocpit at 123". On the second one, I put it at 125", with very good results, it weathercocks less, and is almost perfectly balanced. I have switched to percentages for my third Walrus that is 212" long, I put the back of the cockpit 61.88% back from the bow. All this asumes that the bow and stern are raked about the same as in the pictures in the book. If you have a plumb stern and a strongly raked bow, then the cockpit placement may need to be adjusted.
Mike
: How did you decide where to place the cockpit? Putz 's book says to eyeball
: it, but that seems to forego any formulaic system. I took my walrus off
: the frames and sat inside of it to try to see where the cockpit should go.
: My dad looked at me sitting in the boat and neither of us could figure out
: the exact placement.
Messages In This Thread
- YAWU: Yet Another Walrus Update *Pic*
Bill Price -- 10/8/2000, 1:55 am- build time
jason -- 10/9/2000, 11:23 am- Re: build time
Roger Nuffer -- 10/10/2000, 1:07 am- Re: build time
Bill Price -- 10/9/2000, 1:34 pm - Re: build time
- Re: YAWU: Yet Another Walrus Update
Roger Nuffer -- 10/8/2000, 11:18 pm- Re: YAWU: Yet Another Walrus Update
Bill Price -- 10/9/2000, 1:26 pm- Re: Walrus cockpit placement
Mike Hanks -- 10/9/2000, 1:30 am- Re: Cockpit placement ?
Rehd -- 10/9/2000, 12:20 am- Re: Cockpit placement ?
Roger Nuffer -- 10/9/2000, 1:28 am- Re: Glues and skin coatings
Mike Hanks -- 10/9/2000, 1:39 am- Re: Glues and skin coatings
Roger Nuffer -- 10/9/2000, 2:20 am
- Re: Glues and skin coatings
- Re: Glues and skin coatings
- Re: Walrus cockpit placement
- Re: YAWU: Yet Another Walrus Update
David Dick -- 10/8/2000, 1:03 pm- Re: YAWU: Yet Another Walrus Update
Bill Price -- 10/8/2000, 9:00 pm
- Re: Great Shots
Rehd -- 10/8/2000, 3:01 am - Re: build time
- build time